For smooth, fluid shifts and a quiet drivetrain, pick up Shimano's HG-73 9-speed Chain. It's the perfect way to have your bike running like new again.

Shimano Tiagra CN-4601 10-Speed Chains - For Ultegra 6703 and 105 5703 triple drivetrains, please see 10-Speed Hyperglide non-directional chains - Hyperglide 10-Speed chain - Not compatible with Shimano 10-Speed Dyna-sys mountain bike drivetrains - Directional inner and outer plates designed for better contact with gear teeth allow smooth shifting even under high load conditions - Chromized rivet pins improve wear resistance - Perforated plates for reduced weight - 116 links

Shimano's Ultegra 10-speed Chain offers crisp shifting and excellent durability. Smooth, precise shifts come courtesy of the meticulously engineered inner and outer plate chamfers that are specifically designed to accommodate the unique requirements of a moving chain. And, the plates are perforated to trim precious grams. - Weight: 267g

The high torque loads of E-MTBs require tough components. The straighter chain line EX1 offers allows the use of a chain that is wider and more robust than those found on drivetrains not specifically engineered for E-MTBs. The EX1 chain has been engineered to run quiet across the gear range and transmit more power to the rear wheel. - EX1 chain is wider and designed for the high-torque, heavy-duty use of E-MTB - Closing Link: PowerLock - Outer Plate: Nickel - Inner Plate: Polished - Pin Treatment: Chrome hardened - Rivet Type: Solid pin - Recommended Group: EX1

The chain is the heart of the Eagle 1x12 drivetrain, ensuring quiet operation, long life and precise shifting. It features the same link geometry as XX1 Eagle, with solid pins and a more modest finish treatment. - Not for use with front derailleur drivetrains - Links (links): 126 - Drivetrain Speeds: 12 - Chain Connection Type: Single Use Master Link - Half Link Chain: No - Weight: 260 - Compatibility: All levels of Eagle drivetrain systems

The basis of every Eagle drivetrain is its chain—and the NX Eagle chain is designed and manufactured using genuine SRAM Eagle architecture, so it is fully compatible with every other component in the Eagle ecosystem. The NX Eagle chain features solid pin construction, Eagle PowerLock, and smooth, efficient shifting that you can count on every time out. Features/Specs - Eagle PowerLock chain connector with FLOW LINK technology provides better chain-guiding and increased longevity - Unique features and design also provide significantly improved wear resistance on Eagle cassettes and rings - Weight: 278g (126 links) - Material: steel - Speeds: 12 - Compatibility: All levels of Eagle drivetrain systems

SRAM’s 10-speed chain is compatible with all industry-standard 10-speed systems. And, with its great PowerLock connecting link, installation is a snap.

SRAM’s premier 10-speed chain features hollow pins and cut-out outer plates for accurate shifting in all conditions, light weight, strength and smoothness. Plus, it's compatible with all industry-standard 10-speed systems. And, with its great PowerLock connecting link, installation and removal is a snap.

SRAM’s 11-speed chain features heavily chamfered outer plates for improved shifting and quiet running. And, with its great PowerLock connecting link, installation and removal is a snap.

SRAM’s 11-speed chain features heavily chamfered outer plates for improved shifting and quiet running. And, with its great PowerLock connecting link, installation and removal is a snap.

The PC-951 is SRAM's most economical PowerChain and maintains their high standards of quality. It boasts tough chrome-hardened pins for durability and accurate shifting. And, with its great PowerLink, you don’t even need tools to install it.

SRAM’s PC-971 Chain delivers light weight, strength and smoothness to your drivetrain. Its nickel-plated sideplates provide faster and more accurate shifting plus excellent reliability. And, with its great PowerLink, you don’t even need tools to install it.

It might look normal from the outside, but the engineering inside this incredible chain design is anything but normal, and it makes possible a gear range previously found only in 2-chainring drivetrains. And it’s also the biggest contributor to the Eagle drivetrain’s ultra-smooth, precise, durable and quiet performance. The Eagle chain’s links have a smooth radius, with no sharp edges or chamfers, which yield a significant reduction in noise, friction and wear on chainrings and cassette cogs. This design also allows for a flatter plate, which means more consistent chain riveting and greater overall strength. HARD CHROME technology extends the chain’s optimal performance life.

With SRAM's X1 Chain, it's 1x11 all the time, so the chain can be narrower, stronger, faster — all because it doesn't have to deal with high-stress, front chainring shifting. Since it only has to do rear shifts, gear changes are telepathically fast and feathery light. Its "wide tooth, narrow tooth" pattern perfectly matches SRAM's X-Sync chainrings so dropped chains and cumbersome chainguides are a distant memory. The durability is impressive, too, with SRAM's Hard Chrome tech, solid pins and a proprietary link finish for improved life span.

With SRAM's XX1 Chain, it's 1 x 11 all the time, so the chain can be narrower, stronger, faster — all because it doesn't have to deal with high-stress, front chainring shifting. Since it only has to do rear shifts, gear changes are telepathically fast and feathery light. Its "wide tooth, narrow tooth" pattern perfectly matches SRAM's X-Sync chainrings so dropped chains and cumbersome chain-guides are a distant memory. The durability and weight is impressive, too, with SRAM's Hard Chrome tech, hollow pins and a proprietary link finish for improved life span.

Record chains represent Campagnolo's highest quality and performance chains and are available in 9, 10 and 11 speed versions. - Chrome-Nickel-PTFE finish - Designed specifically for use with Campagnolo 8 and 9 speed drivetrains only - Links (links): 114 - Color: Silver - Width: 6.8 mm - Drivetrain Speeds: 9 - Chain Connection Type: Pressed Pin - Half Link Chain: No - Weight: 300 grams

The KMC S1 is a single-speed chain suitable for use with internally geared hubs, or any single speed drivetrain. - High pin power with reinforced durability - Offers a quieter riding experience - Anti-drop design - Inner plate chamfering helps to provide fast and smooth shifting - Internal gear hub system compatible - Links (links): 112 - Color: Silver - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Half Link Chain: No